▼ Buy "A Safety Alarm" Now ▼
Scroll Down The Page

Scroll down to browse through information on Safety Alarms for Inground & Above Ground Pools and Yard &Gate Alarms for the backyard.  We don't simply sell products, we help you make a better-informed choice, by providing all the information, you might require.  All items ordered will end up in the same shopping cart, no matter on which page, of this website, the items are located.   These items can be ordered on-line,  from askalanaquestion.com, with convenience and security.  All Major Credit Cards, PayPal* or Checks are accepted.    One order does it all! 
* PayPal is an eBay Company and is the world-wide leader for secure on-line payments.

Pool Safety Alarms
Gate & Yard Alarms
for
Inground & Above Ground Pools & Backyards

Providing the safety and piece of mind, that helps you to better enjoy your pool & backyard.

Pool safety is a serious matter!!!  Pool Safety Alarms help provide the extra measure of safety, for inground and above ground pools.  Gate Alarms help secure the entire backyard, by monitoring or restricting entering and exiting.

These safety products are equipped with the most advanced pool alarm technology available subsurface wave detection. A pool alarm alerts you to accidental falls, into the pool, and unwanted pool intrusion, while eliminating false alarms from wind, rain, falling leaves, etc.  It detects objects weighing 15 lbs or more entering the pool, and all models feature adjustable sensitivity. A pool alarm is an essential addition to any safety program.

All aboveground pool models monitor pools up to 24' round or 16' x 32' oval*. The PE12 is the standard aboveground pool model, and the PE13 for aboveground pools is equipped with both poolside and in-home remote alarms.  The PE23 immersion alarm features advanced safety technology and can be used in an  above ground pool, with flat top rail construction.

All models, of inground alarms, monitor pools up to 18' x 36'*.  The model PE20 is the standard alarm for inground pools and the model PE21, also for inground pools, comes with both poolside and in-home remote alarms and a poolside air/water temperature monitor.  In addition to subsurface wave detection technology, the model PE22, for inground pools, features an added layer of protection Infrared "Night Vision", which monitors the pool area.  The model PE22 also comes equipped with an in-home remote alarm that alerts you with human voice announcements and/or siren, depending on the level of intrusion.  The model PE23 immersion alarm features advanced safety technology and can be used in all types of inground pools.

Yard and Gate alarms are designed to alert you upon unsupervised entry to your yard or pool area and meet or exceed current state barrier alarm codes.  Hardware is included for mounting on gates, doors, and windows.

PE12
(alarm shown installed)

(siren)

• Uses subsurface wave detection technology - the most accurate pool intrusion detection available.
• Affordable and easy to install.
• Patented sub-surface propagation wave detector.
• Sensor placed below water surface eliminates false alarms, due to wind, rain, etc.
• Detects objects 15 lbs or more.
• Adjustable sensitivity.
• 120 dB alarm siren (stainless steel speaker)(95 dB at 10ft.).
• ETL-listed to UL standards.
• Child-proof locking ON/OFF switch with audio indicator.
• Automatic low battery check - chirps every 60 seconds.
• Recommended for pools up to 24' round or 16' x 32' oval (larger pools require an additional alarm).
• Automatic reset in 3 minutes.
• Power check test button.
• Sensor mounts under top ledge / siren on vertical support post outside of pool.
• Water-resistant/weatherproof construction.
• Runs on 4 AA batteries (not included).
• Bilingual installation/operation manual (English/French).

Download the PE12 Manual
 

PE13
(alarm shown installed)

(siren)

(remote receiver)

• Uses subsurface wave detection technology - the most accurate pool intrusion detection available.
• Affordable and easy to install.
• Features in-home remote receiver.
• Patented sub-surface propagation wave detector.
• Eliminates false alarms due to wind, rain, etc.
• Detects objects 15 lbs or more.
• 120 dB alarm siren (stainless steel speaker)(95 dB at 10ft.).
• ETL-listed to UL 464.
• Child-proof ON/OFF switch with audio indicator.
• Built-in RF channel A or B select.
• Remote receives signal up to 100' away.
• Remote can be connected to a home security system.
• Automatic low battery check - chirps every 60 seconds.
• Recommended for pools up to 24' round or 16' x 32' oval (larger pools require an additional alarm).
• Automatic reset in 3 minutes.
• Power check test button.
• Sensor mounts under top ledge / siren mounts on top ledge.
• Water-resistant/weatherproof construction.
• Poolside alarm operates on one 9 Volt battery (not included).
• Remote receiver operates on UL/CSA listed AC adapter.
• Remote features 9-Volt battery back up (battery not included).
• Bilingual installation/operation manual (English/French).

Download the PE13 Manual

PE20
(alarm w/siren shown installed)

• Uses subsurface wave detection technology - the most accurate pool intrusion detection available.
• Affordable and easy to install.
• Patented sub-surface propagation wave detector.
• Sensor placed below water surface eliminates false alarms due to wind, rain, etc.
• Detects objects 15 lbs or more (sensitivity adjustable).
• Stainless steel deck mounting system and ladder mounting system included.
• 120 dB alarm siren at poolside, 95 dB at 10ft.
• ETL-listed to UL 464.
• Child-proof ON/OFF switch with audio indicator.
• Automatic low battery check - chirps every 60 seconds.
• Recommended for pools up to 18' x 36' (larger pools require additional alarm.
• Automatic reset in 3 minutes.
• Power check test button.
• LCD display.
• Operates on one 9 Volt battery and 1 AA battery (not included).
• Bilingual installation/operation manual (English/French).

Download the PE20 Manual

PE21
(alarm w/siren shown installed)

(remote receiver)

• Uses subsurface wave detection technology - the most accurate pool intrusion detection available.
• Affordable and easy to install.
• Patented sub-surface propagation wave detector.
• Sensor placed below water surface eliminates false alarms due to wind, rain, etc.
• Detects objects 15 lbs or more (sensitivity adjustable).
• Stainless steel deck mounting system and ladder mounting system included.
• 120 dB alarm siren at poolside, 95 dB at 10ft.
• Tested to UL 464 and CSA C22.2.
• Child-proof ON/OFF switch with audio indicator.
• Built-in RF channel A or B select.
• Remote receives signal up to 100' away.
• Remote can be connected to a home security system.
• 2 thermostats for monitoring both water and air temperature.
• Automatic low battery check - chirps every 60 seconds.
• Recommended for pools up to 18' x 36' (larger pools require additional alarm.
• Automatic reset in 3 minutes.
• Power check test button.
• LCD display.
• Water-resistant/weatherproof construction.
• Operates on one 9 Volt battery and 1 AA battery (not included).
• Remote uses AC power adapter (UL/CSA Listed).
• Back-up 9 Volt battery (not included) for remote.
• Bilingual installation/operation manual (English/French.

Download the PE21 Manual

PE22
(alarm w/siren shown installed)

(passive infra-red motion detector)

(remote receiver w/advanced features)

LAYER 1 - Perimeter Detection

• Preventive alert system.
• Passive Infra-Red (PIR) motion detector, with a range of 180 degrees and up to 50'.
• Independent On/Off control with child-proof lock.
• In-home remote receiver features voice announcements, when perimeter alarm is set off.
• Automatic reset in 30 seconds.
• Adjustable Passive Infra-Red (PIR) sensitivity.

LAYER 2 - Immersion Detection

• Patented sub-surface wave detection.
• Sensor placed below water surface eliminates false alarms due to wind, rain, falling leaves, etc.
• Detects objects 15 lbs or more.
• Adjustable sensitivity.
• 120 dB alarm siren, 95 dB at 10 ft. at poolside.

System Features

• ETL listed to UL 464.
• Child-proof ON/OFF switch with audio indicator.
• Stainless steel deck mounting system and ladder mounting system included.
• Automatic low battery check - chirps every 60 seconds.
• Recommended for pools up to 18' x 36' (larger pools require an additional alarm).
• Power check test button.
• Water-resistant/weatherproof construction.
• Interactive weather-resistant control.
• Back-up 9 Volt battery (not incl.) for remote.
• Poolside unit operates on 6 AA batteries (not included).
• Bilingual installation/operation manual.

Remote Features

• Built-in RF channel A or B select.
• Remote receives signal up to 100' away.
• Remote can be connected to a home security system.
• Remote announces "Check the pool" 3 times, when perimeter alarm signal is detected.
• Remote announces "Emergency! Check the pool!" and sounds alarm when underwater alarm signal received.
• Remote announces "check the battery" when low battery signal received from poolside unit.
• Remote uses AC power adapter (UL/CSA listed).
• Back-up 9 Volt battery (not included) for remote.

Download the PE22 Manual

• Meets or exceeds state barrier alarm codes.
• Convenient single button pass / reset operation.
• 7-second delay allowed for adult pass-through.
• 120 dB alarm siren - minimum 95 dB at 10 feet.
• Auto low battery chirp.
• Operates on one 9-Volt battery (not included).
• All hardware included for gate, door or window mount.
• Listed by ETL to UL Standard 2017.
• Water-resistant.
• Always on device, as required by barrier codes.
• Can be manually reset or will automatically reset in 3 minutes, to continue siren.
• Alarm goes off immediately, when triggered, as required by barrier codes.
• Bilingual installation/operation manual (English/French).

Download the YG03 Manual

• Program Your Own Entry/Exit Code.
• Meets or exceeds state barrier alarm codes.
• 7 or 15 Second Delay Allows for Adult Pass-Through.
• Convenient single button pass / reset operation.
• 7-second delay allowed for adult pass-through.
• 120 dB alarm siren - minimum 95 dB at 10 feet.
• Auto low battery chirp.
• All hardware included for gate, door or window mount.
• Listed by ETL to UL Standard 2017.
• Water-resistant.
• Always on device as required by barrier codes.
• Can be manually reset or will automatically reset in 3 minutes to continue siren.
• Alarm goes off immediately when triggered as required by barrier codes.
• Operates on one 9-Volt battery (not included).
• Bilingual installation/operation manual (English/French).

Download the YG18 Manual